Gas fireplaces are great additions to any home; they look bigger and more efficient than wood stoves; although they require just maintenance. They know that gas is dangerous; Therefore, it is important to take life seriously. See this article for 10 tips for gas fireplace maintenance that will keep you safe and keep your fireplace working efficiently. . If you think you have any kind of problem with your gas fireplace, have a professional take a look at it, not knowing the problems can be dangerous and deadly.
1. Health first
When attempting any maintenance or cleaning, the gas valve must be removed; if the lever does not turn, there is the potential for injury or death.
2. Get the unit inspected
When dealing with a gas fireplace you don’t want to take any chances if anything seems off with the unit, on the safe side you should call a licensed gas technician.
3. Do you need a gas stove?
Not all gas fireplaces require a fan; however, some install fans to spread the heat throughout the room. If you happen to have a fan, make sure to check if it is working properly, if not you are not getting the full benefit of the fireplace.
4. Ventilation system
The ventilation system is one of the most important things to check while performing maintenance on a gas fireplace. If there is a blockage or anything preventing the ventilation system from working properly, it should be fixed immediately. If the ventilation system is slow you could have something like a very safe fireplace that could cause injury or death.
5. Clean the mirror in the door
Every 1-2 months you need to clean the glass to prevent dirt from building up and irregularities. Make sure it is cleaner as the manufacturer recommends the safest gas fireplace. Most hardware and large home improvement stores sell special glass cleaners for gas fireplaces and can be found near fireplace accessories.
6. Is it necessary to take the door off to clean it?
When cleaning the glass in the gas fireplace door you have two options, you can leave the door attached to the unit or remove it and clean it on a soft surface. If you turn off the gas stove and you feel it still connected, then you can clean it in this way to save time and irritation.
7. Have you checked out fake boards recently?
Logs used in gas fireplaces are dirty and can even break on occasion. Do everything on a monthly basis or at the first sign of unusual behavior; skipping this step could cause malfunction and possibly injury. When cleaning forged logs, make sure to use a soft-bristled cleaning brush that can be picked up for most hardware.
8. Don’t skip annual maintenance
Although the annual maintenance for a gas fireplace is very expensive, since it requires a licensed gas technician, it is useful to not skip maintenance. If there is a leak or build-up in the ventilation system, you could be out a lot of money than the cost of maintenance in damages. Many gas fireplace owners skip this step to save a few dollars; however, skipping this step can cause malfunction and even injury.
9. Use is recommended for cleaning wood, glass and interiors
I worked for a local hardware store for several years as a student job and I know that the prices of cleaning gas are very high. can Although cleaners are expensive, you should not try your solution unless recommended by the manufacturer; you could void your warranty and damage the unit. Don’t cut corners!
10. Light pilot
The pilot turns off the light in spring and summer, when the stove is not in use; it can easily be reversed even in months, which is in practice. Always read the instruction manual before piloting the alarm light.
Sources:
http://www.stretcher.com/stories/04/04oct25e.cfm
http://hearth.com/econtent/index.php/articles/cleaning_glass
Personality experience working for hardware for several years
