Have you seen one of these woolly balloon balloons? He usually likes to see them at weddings. It is a simple arch through which the couple walks to say their vows, then through husband and wife again. . If you think it would be nice to have one of these at your wedding don’t bother browsing through the catalogs to check the prices! You don’t need to be too excited while planning your bride’s wedding!
Take a look through home improvement and you’ll find a variety of things that you can use to make your own closet. One type is hard wire. Look for a wire that is stiff enough to hold its shape, but is easy for you to bend. Although it may be impossible to bend pieces of wire or metal, you can often bend or bow really long pieces easily.
Decide how tall and how wide you want the bow to be and buy enough wire to complete it. Place one stiff wire in the ground making sure you insert it deep enough to stand on its own. Add another one to the foot of this wire, and simply tape them together with duct tape. Place the second wire so that the first wire is attached to the two hooks. The very end of the new wire is the first to tape. Go up a few inches and again thread the two threads together.
Continue adding another wire and another in the same way as above until you have enough wire to complete the shape of the bow. To get to the opposite side of where you started just push that wire into the ground like you did the first time. Make both sides equally low so that the bow does not lean to one side.
Some people find it easier to lay pieces of wire, the end on the ground, and then machine all the sections together. Place one end downwards, as the opposite end is bent, and push it into the ground. Grab the opposite end, bending the arrangement into an arc shape, then hold it on the ground.
You can make the bow more solid than you once made an arrangement. Make two or three rings, very close to each other, to make a much deeper bow. The towers can be connected to each other, if you want, or left as they are.
Tie a string or balloons around the entire bow so that you can’t see it anymore. If you have made more than one wire bow tie the balloons in an arrangement to give it the appearance of only one.
Another thing you will find in the home improvement store that is suitable for making wedding arches is pvc pipe. Hard plastic pipe can be purchased in various lengths, curves and more. They sell plastic articles that you use to assemble the design. You will drive the poles into the ground, so that the pvc pipe stands for the arch.
Whatever material you use to make your own closet arch you’ll find that it’s really pretty simple and less expensive than buying it. And look how beautiful the finished bow will be!
Report:
- Cheap fish here: www.orientaltrading.com