A troubled economy and high unemployment rates have forced many homeowners to take on the task of home remodeling and upgrades without hiring a construction crew. This may take a little more time, but the home owner can have substantial savings and improve the value of their home with the installation of base cabinets.
Here are ten tips to help someone who has chosen to install a baseboard on their own.
1) Make sure there is an even area under your floor for the base cabinets to sit on. If the floor is not in good condition, then the cabinet will be installed. Nothing will be flat and the doors of the cabinet will not be closed and the maximum force of the cabinet will be very heavy. However, you will have uneven floors due to natural home remedies. With a few handyman skills you’ll be able to fix the problem so your base cabinet installation is a breeze and everything looks amazing.
2) Make sure you have an even hand and also plenty of squeegee to repair spots that aren’t flat or flat.
3) The first step in installing your desk base is to find the highest spot on the floor. You can do this with a notebook. After you have placed a high spot on the wall.
4) Please remember that the base of the back of the box is equal to the front of the box. If the back of the cabinet is higher then the front of the cabinet then you will have to use shims to match the height of the cabinet. If the top drawer is in the front, then you will have to lift the back.
5) Be sure to draw a vertical line on the top of the base of the cabinet on the wall all the way around, so that you know that the line of your cabinets should be red. Use a 2×4 and a ruler to draw your line. Remember that when measuring the top line of closets be sure to start with the mark on your wall that shows where the highest spot is on your floor.
6) The height of the box of signals in United is 34.5 inches.
7) It is easier to connect all the boxes before installing them on the wall. They do this by using simple turnbuckles. Even professional box offices have special clips that they use for boxes, but they are not needed for the typical home owner. Don’t rush and buy those expensive buckles when you can use what you already own or what is much cheaper, you can reuse it in other projects. Always remove all trim and doors before installation for easier work.
8) In front of the wall cabinets, try to make sure everything is flat and smooth. Check once, click twice. Always use top of the line screws when installing cabinets. Each screw should go into the bubble at least 1.5 inches and preferably deeper then that. The screws are expensive, but they are worth the extra money to get the top end.
9) If you need to use shims always use the shims where the wall stud is because you need to use a nail driven straight through them so you don’t have to worry about the stores moving later on and everything becoming uneven. . The latch prevents the latches from moving so the drawers are secure.
10) Once your cabinets are installed, it’s time to attach all the doors and attach them to the doors. boxes Now you can admire your beautiful storage bases that are easily organized by you. It is a job well done and you should feel a high degree of pride in your achievement.
Sources:
http://www.hammerzone.com/archives/kitchen/base/cabinet1.html
In-A1472.html
http://www.hometime.com/Howto/projects/kitchen/kitchen_
