Making the City Skyline ascension modern headboard from a photograph can be an easy weekend project to transform and design your master bedroom on a budget. Photographs of your city skylines and Canvas Fabric Pieces Make it a modern headboard!
I love making a simple modern city skyline headboard from fabric scraps and Photo Iron Transfer Paper. You can use images of your city skyline or any city you like and print them on photo transfer paper.
Follow the instructions on your photo transfer paper and place your city skyline photo on a piece of canvas. You could also blow up your photo to size, then cut it into squares to create one large image. It will create different blocks of the same skyline image over and over again.
You can easily make a great looking upholstered headboard from almost any city skyline photo transferred to the wall.
Try typical photos in black and white corners in colored corners.
This Pop Art You can complete this in one day, less than 150.
Click here to check out more ideas from Rebecca.
For a modern city skyline you will need a Headboard
MDF (3, 6, 6 or 9 Pieces, sizes described below)
foam
Fabrication
Staple Gun
Snails
Flat L brackets
Spray adhesive
Canvas fabric
Scissors
Photo transfer paper
Take a photo of your city’s skyline
The first step is to cut the MDF to your size. I recommend letting the experts at home improvement sponsor you these ways. 25 cents only pretend to be cut! I recommend about 15 inches by 15 inches. covering a bunch of squares to make one big headboard.
My measurements are only recommendations for the bed. You can easily change the dimensions of this modern city skyline headboard for a twin, full, or king-sized bed. .
Separate pieces of MDF to the following measurements: 15X15 inches.
Now the canvas is cut to 18 by 18 inches. This will allow about 3 inches to be joined on the back.
You need at least three of these, but you can make them as wide or flat as you want.
Now cut a piece of foam to fit each of the three or more pieces of MDF exactly. You can buy foam boards at any fabric store. save time as you can cut. You can easily cut that house using an electric knife.
Lay your pieces of MDF out on a flat work surface. Lightly spray each side with a strong adhesive spray. Place the corresponding piece of foam on the MDF and press it into place. Spray adhesive when they hold in place so it doesn’t always move.
Place the city skyline face of the world on a flat work surface. You want to see the model you want to put on the table.
Place the matching piece of MDF and foam on the back of the city skyline fabric.
Foam to touch the back of the fabric of the city skyline. The beginning of the middle on both sides. Peel off the fabric and back of the MDF. Use a staple gun to attach it in place. If you are worried about damage to the city skyline you can use upholstery fabric.
Make the middle of each of the four sides first. The device in the fans each cartoon time. Also, exercise your exit from the center of the staples. Through the four corners. Make neat practice folds to wrap yourself in a bundle. Once you have the right look, staple the corner fabric into place.
Repeat this process on all the pieces of this chapter.
Now, when all the parts of your city skyline are woven, you need to put them on the surface of the world work surface. Place three in a row or however many you need to be as wide as the specific bed. A straight square on the bottom of the headboard. This line should be straight, making a straight line at the top of this headboard.
Use flat metal brackets to join each piece of the new headboard together. Place one at the top and one at the bottom on each side of the head. The left bracket hole should be on the left side, and the right bracket should be on the right side. You can find these flat brackets where L brackets are in hardware store. Make a mark where each hole falls with a pin. Pre drill a hole about an inch in. Place the brackets in place and screw them into place.
Screw in the hanging picture hook on the left side and right back of the climbing city skyline headboard.
The hooks should be placed about four inches from the right side of the head. They should be about 2 inches from the top of this piece.
Install the screws on the wall and hang your ascent of today’s capital.
Click here to check out more ideas from Rebecca.
