You may be asking yourself, what is Drywall and how is it different from Sheetrock? Well, in order to answer such a question, you have to look deeper into the process by which drywall is made to give it its appearance.
Drywall is made up of strips of paper wrapped around an inner core made of plaster of paris. It is a mixture of fiber plaster, plasticizer, foaming agent, finely ground gypsum crystals as an accelerator, EDTA, starch, various additives that increase rust and fire resistance, wax emulsion and water. This is then formed from wet gypsum sandwiched between two sheets of heavy paper or fiberglass mats. When the gypsum plaster dries, the sandwich becomes strong enough to be used as a building material.
Drywalling is the term for the method of constructing interior walls and ceilings using panels made of gypsum plaster. Many such boards are made with fiberglass instead of paper to prevent growth from forming. Dry construction is used to complete the construction of interior walls and roofs. Drywall construction has gained popularity as a faster alternative to lath and plaster technology, which involves applying thick plaster, known as the base of the plaster wall work (mostly thin panels are attached with a key with a small gap between them). Each table would be approached successively and by hand. Drywall, compared to plaster, only requires hands to finish the corners and holes. This process is done using a product we call SLUDGE. drying requires less work and drying time, which is only needed for mud and the regions between the plates and rooms with relief corners.
So what is sheet rock?
Drywall Panels are also known as gypsum board, wallboard, plaster (USA, UK, Ireland, Australia), rock lath, and “SHEETROCK” (a trademark of USG Corporation)
Wait SHEETROCK!? Thus, Sheetrock is a variation of Drywall that is identical in manufacturing, with the exception of certain chemicals used. These are all signs of drywall.
These sheets almost all come in 8 foot segments no matter how they are manufactured, and often need to be cut to the required sizes. They are then erected against the wall with an open face and turned by the group first to be “Screwed” (it makes many screws to put on the parts of the board with the bosses under them). When the boards are all gone the crowd will come and use a paper tape similar to scotch tape to cover all the gaps. Finally he layered MUD (a plaster-like substance that is easier to manipulate but not durable) over every gap and filling every screw hole. The last thing the sailors do before they leave there is a razor (a rough edged piece of iron similar to a sanding pad) to get everything down.
As you can see Sheetrock is just a brand of drywall much like “Channel Blocks” just a brand of tongue and groove. However, every set of tongue and groove pliers to the end seems to be called “Cannel Lock”. Almost any drywall will be addressed at one time or another. Although this may be confusing to someone who knows how to sell, this can explain it to you. Most construction workers or “Drywallers” construction or “Drywallers” who use Sheetrock on a regular basis should know that drywalling It is said that although they use Sheetrock. .
Because Sheetrock is one of the most widely used brands of dry wall here in the US you can find many brands called Sheetrock for those who manufacture or Drywaller crews , with Sheetrock sailors etc.
Report:
- www.associatedcontent.com/article/2333502/ how_to_hang_drywall.html? cat=6
- www.associatedcontent.com/article/2017584/ consumer_product_safety_commission.html? cat
