Now that it’s fall and the cold weather is upon us, take the time to make sure your fireplace damper is working properly. Over the years of use, the damper cover can become twisted or damaged. If this is the way your face or damper cover is, you need to replace this part of the flow. the damper is that metal in the chimney. If it’s not working well, then allows cold outside air to descend into your home. but not all. It also allows hot air to escape from the fireplace. Over time the dampers can warp and need replacing. You don’t need to hire a professional to come in and replace the damper cover yourself. This is a job that you can do very easily.
Preparing to remove Damper
If it’s winter and you just want to use the stove, you have to wait until it cools down. Right, think of an oven. You wouldn’t get inside after you put out the fire, would you? Of course not, because it would seriously burn you. You should wait until the oven has cooled down and you could safely burn without you. This fire is the same. Wait until the logs are no longer burning or burning and inside the fireplace to cool to the touch. If you don’t, you risk getting burned.
When the focus is almost cold, it would be good to start preparing. You should place a large piece of plastic or tarp in front of the stove to keep the mess to a minimum. Do this before you start cleaning the fireplace. Fireplaces are solid with soot and ash. You don’t want to track your home.
Crying into the fireplace, I found Damper
Wear leather work gloves. Remove the burned wood and put it in the metal trash. Now it’s time to remove the grill and set aside.
Go into the fireplace and take a lamp or trouble by the light. You need to light the fireplace, so you can find the damper. Once you’re inside, look around and you’ll find a damper. It should be placed only a foot or two above the fireplace opening. It is important to have enough light to see what you are doing.
As you look in that area, find the bolts that hold the damper in place. You will need to remove those clauses with a custom key. Turn the bolts counterclockwise to remove. Put the locks in your pocket or purse. Do not loosen the brackets because you will need to replace them when you install the new damper cover.
When you have removed the locks, touch and turn the moisture cover sideways into the flue. This will allow you to remove the rod that holds it in place.
Install New Damper
Before installing the new damper cover, check it against the old one. Do the work because replacing the damper with the same size or cover will do you no good. If you haven’t bought a new damper cover yet, simply take the old one to your store to buy a new one. You can find damper covers at most hardware stores or home improvement stores. If I live in a rural area, try a lumberjack, Menards, Ace Hardware, courses or Bombgaars. Taking the damper cover with you to the store will help you to find the size that will fit in the end.
Now you are ready to install the new damper cover. So go back to the hearth and turn the trouble into light. You will need to replace the damper cover on the rod. The damper cover is held in place. You will now find the four balls that you removed earlier and put them back in place.
Place the grill on the stove. He also put some skirts. Now fold the piece of plastic that protected the area. All you have to do now is light the fire, settle in your favorite seat, and enjoy the warmth and ambiance.
