Sponge painting has gained its fair share of popularity. This is because there are so many different sponge painting concepts that offer different forms. On the surface, each job looks completely different. If you’re thinking of looking, but don’t know where to start, here’s a place to start. Sponge painting is significantly different from brush and/or paint roller. Here are 10 simple tips to help you get started.
Make sure that any debris, or film, or any kind of glue, is properly removed before doing anything else. This can cause the sponge and/or paint to stick to it, creating a look that you don’t want. walls or surfaces should also be clean.
Make sure the surface is prepared before even thinking about going down with the sponge painting. Those who skip this process will live to regret it. Follow the directions given by the paint manufacturer’s instructions. This is true of any type of paint and is one of the cheapest mistakes that can easily be avoided.
Afterwards applying the base coat with a paint roller, allowing time for wiping. However, the surface does not completely dry. Some people even suggest that you start sponge painting while the bottom coat is still damp. Personally, I prefer to let the base dry completely.
Do not, I say, use a sponge to paint. More particles of dirt and other things can get into them, leaving a lack of luster to the paint job. Sponge painting must always be done with a new sponge.
The sponge must not only be new, but it must not be done. Always use natural sea sponges when painting. Not only do these patterns and designs yield better results, but they work much better.
It is equally important to ensure that there is no excess moisture in the sponge. Spread the sponge on the paint and express it outside. It can also help to wipe the sponge on sponge or another clean surface.
While you don’t want too much moisture, the sponge should always remain moist. Don’t let the sponge dry out too much. This can cause the entire project to collapse.
Light the inside of your sponge wash and light the inside of the wash frequently. This helps prevent build up in areas within the sponge. If you neglect to rinse the sponge many times, the ink will blob or eliminate the design on the surface.
For each size and sponge, I’ve always found it useful to use a small piece in the corners. For your convenience, this is also a good idea. Remember that a small portion of the sponge is not only good in the corners, but can be done in other areas of the surface . . By doing this, the paint adds depth and dimension to the surface.
Sponges roll gently across the surface. Sponge rolling not only helps you finish the project faster, but you can play with the texture.
These are a few tips on basic sponge painting. Those who design more intricate paintings may want to consider other options. Sponge painting is quite simple and can be added to any room.
