Creating a Vintage Tin Kitchen Wall Storage Unit is an easy, fun, and affordable project that will add tons of vertical storage to a small kitchen. While it’s not difficult, you need to pay attention to the details to look professional. This Vintage Tin Kitchen Wall Storage Unit project would cost you about $100 depending on the materials you already have.
To make a vintage leaded kitchen wall storage unit you will need:
Celestial Wallpaper
MDF Sheet
Primary
To paint
2 Large picture hooks
2 “The Conclusion of the Key
Hammer
Vasa bars (tonal)
S. hooks
Storage baskets
The printed cabinet is the key to this whole vertical kitchen storage design. You can buy a wall mount at any Home Depot or Lowe’s. They range from $14.99 to $19.99 per vol. It applies like regular wallpaper, but you can buy it in many traditional styles that mimic lead ceiling patterns, bead board, and even brick. For this project, he would buy a volume model similar to the lead ceiling.
The next step is to measure the open space in your kitchen Now you need to open up your storage space so that you can have your MDF cut to size.
Almost every home improvement store will cut wood and MDF; You only need to give them measurements. Have the MDF cut to size. Don’t be afraid to fill a large space. You can always paint this design the same color as your kitchen wall to help the storage visually disappear.
While you’re at the home improvement store, cut the crown molding to the same width as your Vintage Tin Kitchen Wall Storage Unit. It will save you from having to cut it later when replacing the kitchen wall unit.
Now, the first thing you need to do is the first MDF crown and crown. This is dry.
After the primer has dried, you can apply your etching film to the MDF. Work from the inside out if your paper is not the same width as the stored board. Do this to end up with a show kitchen storage unit.
Allow your wallpaper to dry completely and repeat it first.
Attach the crown molding to the top of the Vintage Tin Kitchen Wall Storage Unit with wood glue. Use 2 inch nails to hold it in place while the glue dries.
Now paint the whole Vintage Tin Kitchen Storage Unit out in (white) paint. You can use any color if you want, but white is nice. I recommend semi-gloss white paint so you can easily wipe and clean it. This is especially useful if this Vintage Tin Kitchen Storage Unit is going to be in a large kitchen.
Once the entire Vintage Tin Kitchen Storage Unit flipped over a flat surface the side was lowered. On both sides of the board, about four inches from the side, fix your pictures hooks. This is how to hang a custom Vintage Tin Kitchen Storage Unit on the wall.
Drill your screws into the wall and your vintage hooks from the Kitchen Storage Unit.
Here are a number of unique items you can add to this vintage kitchen Storage Unit to make it truly unique and provide lots of storage;
– Look for these bars sold in large Ikea containers and they store almost every home improvement. Hamas allows you to hang from them, to hang pots and pans from them. You can also use copper plumbing.
– Try looking at some vintage lead cans that have been emptied. You can go straight through the screws from the inside, just inside them. Now load them up with kitchen utensils! The same can be done with baskets!
-Hooks are always a great way to add storage in the kitchen. You can hang oven mitts and spoons from them!
