Curious about what kind of work is put into the furniture you bought or inherited? Would you like to be able to talk intelligently about the piece of furniture you brought to the shop? Then this article is for you.
The furniture is expensive so that one does not get upset when they observe a water stain or injury on their dining room table, a kitchen chair, or a closet? And what about those heirloom pieces of furniture? No one in Attica wants to have an heir to hide his family because of the loss. However, before you try to remove the damage, read the rest.
Before you start trying to repair any furniture surface, or consider spending money at a repair shop, you should know what kind of technique the finish is used for. . It could save you from choosing to pay for injuries, keep you from being deceived by antique dealers and also protect you from believing the impulse of repair. estimates from the uncertain repair shops.
So how do you set a goal?
You might as well trust what the seller told you when you bought the part. After all, costumes are in business, right? They know what they’re talking about, right? For heirloom pieces, you could ask your great aunt Sarah what she thinks it is, or what she remembers her mother telling her about giving birth to her little one.
Or perhaps you can use a more scientific approach. We recommend a more accurate method; Otherwise, when you encounter irreparable damage on your part, you’ll find yourself arguing with your oldest local dealer (and never “getting a lot” or “given up by your great aunt Sarah” again).
To determine what type of border is on your side, you need to do everything you need to do to solve the problem. It is chemical. Each type of work has a different type of finish.
Varnish
How do you decide if you are dealing with the end of the varnish? The quick answer is to dissolve the varnish with no solvent. Various solvents can destroy it, but it cannot be dissolved. For example, paint removal and lacquer thinner will both destroy but not remove. Test, put some thinner lacquer or remove paint on a hidden part of the surface and see what happens. If the varnish is crinkled and cracked. But when you try and brush it off or wipe it off, it won’t. It will take a lot of time to fix the damage in the broken pieces. Your choices are drying the particle and cleaning or using a special solution and cleaning the particle.
Lacquer
You can experiment with lacquer finish by applying thinner to the hidden part of the particle. Take a balloon, wrap it around the tip of your finger, dip in a thinner and rub. . If the surface begins to lift under the finger, then it is processed by lacquer. How does it work? The thinner regenerates the lacquer well. Essentially it re-melts. After a few minutes the thinner evaporates leaving a lighter surface.
Shellac
Test for shellac, varnish or denatured wood. He used the same technique to experiment with lacquer. Wrap your finger tip in a clean cloth, dip it in alcohol and start rubbing the surface. If it starts to re-dissolve, then you are dealing with the lacquer. Sometimes using lacquer paint thinner will solve it. However, if it does, and you don’t even try using denatured alcohol, you won’t know if you’re dealing with Shellace or INK, you need to know something to move forward with your repairs.
That is. Now you know how your piece ended up. Now that you’ve learned about finishing, shop for bargains and you can be more confident with new pieces.
Good bye!
Report:
- An Industry Overview of Furniture/Wood Manufacturing and Refinishing: es.epa .gov/techinfo/facts/refinish.htmlAvoid stain removal, topcoats get gloss, stain like pro, and old finishes: https://www.popularwoodworking.com/store/backissue.asp?issuedate=7/1/2005
